IP: 54.196.74.142  | Saturday, 22nd Jul 2017

Sensorcom

You are here: Home Products Earphones MicroBud Stereo

MicroBud Stereo

A very small generic monitor that also acts as an effective earplug.

 

Description

The Sensorcom MicroBuds are designed to combine a high quality, acoustically compensated ear monitor with a generic ear plug for use under crash helmets for motorcyclists and in ear monitoring systems for musicians. They are supplied with foam and soft-silcon eartips that will self-form to the shape of the ear; the choice of type personal preference. To compensate for differences of ear-canal volume, a set of graduated low-frequency compensation filters have been designed to provide the optimum bass response. Four different sizes are supplied and selected empirically on the basis of personal preference. It is important to select the most appropriate filter size by listening to a familiar piece of music. In some cases – for pitching or click-track – it may be desirable to close the port completely: this sets the driver to produce the least amount of low frequencies.

Specification

  • Driver: Closed dynamic 10mm Mylar Film
  • Power Handling: 20mW
  • Sensitivity: 95+/-3dB @ 1mW
  • Impedance: 32 Ohms @ 1kHz
  • Response: 100Hz – 15kHz +/- 3dB (into 2cc coupler)
  • Cable Length: 1.2M
  • Connector: 3.5MM gold-plated stereo
  • Weight: 11 g
  • Ambient attenuation: Better that 20dB when MicroBuds are fitted correctly

 

 

Contact Us

Sensorcom Ltd.

London, BR3 4LZ, 

United Kingdom

Tel: +44 (0) 208 639 4440

Fax: +44 (0) 208 639 4442

E-Mail: info@sensorcom.com 

 

The MEL Group

Laurence Walter House

Addison Road, Chilton Ind. Est,


Sudbury, Suffolk


CO10 2YW, UK

logo

BSI registered

Holds Certificate No: FM 561435 and operates a Quality Management System which complies with the requirements of ISO 9001:2008 for the following scope:

The design, manufacture, repair and supply of audio communication devices, assisted listening devices and a range of associated products and accessories.

 

The “end of life disposal” of electrical products  in an environmentally friendly way, is the responsibility of the Purchaser.