IP: 54.166.199.43  | Friday, 18th Aug 2017

Sensorcom

Car Loop

Loop Harness for installation under car headlining

 

Description

A multi-turn loop harness constructed from flat ribbon cable and designed to be installed under the headlining of motor vehicles. The can connected directly to a radio (speaker) output or the the Sensorcom V-LIM box if using the VSB noise free system.

Specification

Type:                                    Ribbon MultiTurn

Length:                                  7.4M (produces a circle of 2.36M diameter)

Connectors:                           AMP two socket

Input Z:                                  16Ω ± 10%

Power v Field Strength*:         2.1mW – 10mA/M

                                             175mW – 100mA/M          

 

*To simulate vehicle  installation these measurements were taken with the loop attached to a steel plate with 30mm stand-off spacers. The measurement was taken at the centre of the loop.

 

Contact Us

Sensorcom Ltd.

London, BR3 4LZ, 

United Kingdom

Tel: +44 (0) 208 639 4440

Fax: +44 (0) 208 639 4442

E-Mail: info@sensorcom.com 

 

The MEL Group

Laurence Walter House

Addison Road, Chilton Ind. Est,


Sudbury, Suffolk


CO10 2YW, UK

logo

BSI registered

Holds Certificate No: FM 561435 and operates a Quality Management System which complies with the requirements of ISO 9001:2008 for the following scope:

The design, manufacture, repair and supply of audio communication devices, assisted listening devices and a range of associated products and accessories.

 

The “end of life disposal” of electrical products  in an environmentally friendly way, is the responsibility of the Purchaser.